How to Clean a Pond Pump?

Cleaning your pond pump is something that you should consider doing on a regular basis.

Something that many people don’t do, because they don’t know how to clean it correctly. Or, they think that this isn’t just necessary to clean the pond pump.

How to Clean a Pond Pump?

However, there are many things that you should know about pump cleaning. Things that are essential for you to know.

Here is a complete guide about how to clean your pond pump correctly and safely.

Unplug the Pump from the Socket Completely

The first thing that you should do, is to unplug the pump from the socket completely.

We know that this might sound stupid, but there are so many people that are getting electrocuted. Because they think that they can clean the pond pump without removing it from the socket. Even, if you are switching off the power, it still needs to be unplugged for safety.

Not only should you unplug the pump, but you should remove any electrical cables before you start cleaning the pump. You want to make sure that you don’t get any of the electrical cables wet.

Remove the Pump from the Outer Cage and Dissemble Completely

The next step is that you are going to remove the pump from the outer cage and dissemble completely so that you can clean each and every part of the pump.

That said, you should make sure that you keep all the parts together and that you see how you did disassemble it so that you can put it together again.

Many people have ruined their pumps by not putting it together correctly, or by losing some of the most important parts. If the pump is ruined, you will need to purchase another, new pump.

Don’t Use Soap when Cleaning the Pump

This is one of the biggest mistakes that people are making. They are cleaning all the parts of the pump with soap or detergent. This isn’t recommended. This is because you will kill your fish that is living in the pond.

Fish can’t survive with things that are cleaned with soap. No matter how good you are rinsing it after cleaning with soap. There are many small holes in a pond pump, and cleaning it with soap is going to put your fish health at risk. No matter what.

Look for Damage or any Blockage and Clean Thoroughly

Now that the pond pump is open and all the parts have been removed, there is one essential thing to do.

You should inspect the pump and make sure that you are going to clean the pump thoroughly. You should look for any blockages and damage that might harm the fish.

If there are any blockages, you can clean it by rinsing it out. However, if there is any damage to some of the inner parts of the pump, then replacing the pump is recommended.

Broken parts can mean that the pump isn’t going to work sufficiently and risk filthy water that doesn’t have enough oxygen for the fish.

Reassembles and Connect Wires Again

After you have cleaned and rinsed it thoroughly, then you should reassemble the pump correctly. Make sure that you are using all the parts that you took apart.

You should make sure that the pump is completely dry before you are connecting the electrical wires again. This can be dangerous to connect the wires when the pump is still wet.

It is really important to make sure that you are cleaning your pond pump on a regular basis. And, you need to make sure that you are going to clean it correctly. This is something that you should clean and clean correctly or you can kill your fish.

The most important thing that you should know about cleaning your pond pump is that you should not make use of any soap. This is dangerous and can harm your fish. Just clean water is enough to clean all the parts of the pump.

How to Build a Pond Aerator?

Those that have a pond will know about this problem. Problems with getting air into the pond to ensure that the fish stays healthy.

There are people that think that having an aerator in a pond isn’t necessary, and in some cases, they might be right.

However, there are some ponds and type of fish, where the pond aerator is necessary. But, these aerators are expensive.

With these tips and information, you will know how to build your own pond aerator without spending too much money on it.

How to Build a Pond Aerator?

Why is a Pond Aerator Important?

Before you can start building your own pond aerator, it is important to know why the aerator is important for ponds.

People think that in a pond, there is water circulation that is going to ensure that the oxygen levels in the water are fine enough for the fish.

This might be true, but there are a couple of things that you should consider. The deeper the pond, the less chance there will be that you have enough air in the water.

Especially, at the bottom of the pond. There the water will have the least amount of air. Meaning that the fish that is swimming on the surface of the pond will not get enough air.

A pond aerator is making sure that there is air in the water, from the top of the pond to the bottom of the pond.

Things That You Need in Order to Make your Own Aerator

Yes, you can purchase your own aerator, but this can become really expensive.  These pond aerators aren’t cheap. This is one of the most common reasons why people don’t purchase this equipment.

However, the good news is that there are different ways on how you can make your own aerator. It isn’t just cost-efficient, and easy to build.

But, this is going to ensure that you are saving money in purchasing one in store. It doesn’t really matter what design you are going to use, this is the things that you will need to make your own one:

  • Air pump operating on 12 V and lower
  • Soft Oxygen Air Hose
  • Air Stone
  • Weatherproof Pump and electrical housing/enclosure
  • Red and Black Wires
  • Heat Shrink Tubing
  • Two-way terminal block to connect the pumps to power

The Design That You will Need will be Found Online

The things that you will need to make the aerator is the common things that you will need. At the end of the day, it doesn’t really matter how you are making it.

As long as you have everything you need to have in order to create the best possible aerator for your pond.

Most of the designs can be found online. You will be able to find one that is going to be the easiest way to make one.

Putting Everything in a Waterproof Enclosure

One thing that you need to know. It doesn’t matter what type of design you are going to use. You need to make sure that you are putting everything, especially the electrical cords, in a waterproof enclosure.

Even, if you are making use of a waterproof pump, you still need to waterproof all the other things that you are using to make your aerator.

Pond aerator. Something that you need to use, to ensure that you are getting enough air into your pond. There is always a change that your pond won’t have enough oxygen for all your fish.

Oxygen is the one thing that every fish needs to stay healthy and alive. With this article, you will know how to make an aerator yourself for your pond. You will know then for sure that all your fish are going to get air throughout your pond.

How to Install Aquarium Wave Maker?

There are many benefits in movement in an aquarium. The more waves the water is making, the cleaner the water will be. And, how healthier the fish will be.

With the variety of equipment that you can use for making the waves, people are struggling to know how to install it correctly. One of the things that you should install, is the aquarium wave maker for your aquarium.

How to Install Aquarium Wave Maker?

However, you need to make sure that you are going to know how to install it correctly so that it can be beneficial to your fish.

Here is everything you need to know about installing the wave maker.

Type of Tank That You Needs to Considered

Before you can even consider installing the wave maker, the one thing that you should know is that you need to consider the type of aquarium that you have.

Different types of aquariums need to have different wave movements. Or, you are going to have some trouble instead of getting the benefits of the aquarium.

If you don’t know if your aquarium is going to be right for a wave maker, you should consider doing some research first, or you should talk to an experienced person to assist you with your questions.

Buying the Best Wave Maker is Essential

Now, that you know that your type of aquarium will benefit from the wave maker, you need to make sure that you know which wave maker to purchase.

There are wave makers for larger aquariums and there are wave makers for the smaller aquarium. The last thing that you want is to damage your fish or plant because you have used a too strong wave maker in your fish tank.

The same goes if the wave maker is too small for your tank. Then, the tank and the fish will not benefit from using the wave maker.

Using It in Freshwater with Ornaments

When you are using the wave maker in freshwater where there are ornaments as well, then you need to realize something.

The movement of the water should go through the ornaments. This is the only way that you can make sure that the movement is keeping the ornaments clean as well.

If the water movement doesn’t go through the ornaments, the ornaments will get algae and will start to turn green. And, this is the last thing that you want. Green aquarium ornaments.

Plant Aquarium and the Wave Maker

With the plant aquariums, you should make sure that the wave is strong enough to reach all the plants. The other thing that you should consider is that the plant aquarium can get too much motion in the water.

If this happens to delicate plants, you are going to damage it and then it might not grow healthy.

The plants should have just a small amount of motion when the wave is going over them. Otherwise, the motion is too much and you will ruin your aquarium.

It isn’t hard to install the wave maker. What might be hard is to choose the right wave maker for your aquarium.

There are a couple of things that you should consider, but at the end of the day, it will be worth it. Your aquarium will look great, with the waves that it is making in the water.

How to Set Up Submersible Aquarium Heater?

When it comes to setting up an aquarium, there are a couple of things that you need to know.

And, if you are a beginner that is setting up an aquarium for the first time, this might be frustrating and you might not know how to install all the parts of the aquarium.

Something that many beginners are warning about, is how to install the submersible aquarium heater.

Submersible Aquarium Heater

Especially, if this is something that you have never done before.

With this easy how-to guide, you will know for sure about how to set up the submersible aquarium heater to make sure that your water is going to be correct for your new fish.

Buying the Right Heater

Before you can install the heater into your new aquarium, you need to make sure that you are buying the right aquarium heater.

This is the only way that you can be sure that your heater is going to be large enough for your aquarium.

There are different types of submersible aquarium heaters that you can purchase. There are some large ones and there are some of the smaller ones.

You should check with a professional about which heater you should purchase for the size of your aquarium. You normally need to know the number of liters your tank is using.

The Quality of the Heater Should be Checked

Something that a beginner is doing wrong, is that they might be looking for the cheapest heater for their fish tanks. And, this is something that you should not do.

The cheaper quality heaters don’t last as long as the higher quality ones. This means that you might have water that is getting cold and fish that is dying. And, this without realizing it.

This is why you should make sure that you are going to spend a bit more money and purchase a higher quality heater that will last a lot longer.

Setting Up your Submersible Aquarium Heater for the First Time

How to Set Up Submersible Aquarium Heater

The good news is that it isn’t really hard to set up your submersible aquarium heater for the first time. You should only make sure that you are following these easy steps.

  • The first step is to set the temperature on the heater. Make sure that you are setting the heater on the correct temperature for the type of fish you want to add to the tank.
  • Then, you should place the heater in the right spot, where you want the heater to sit. You can place the heater anywhere in the tank, as long as it is under water.
  • Switch the heater on and wait until the water has reached the right temperature. It is best to wait overnight and to place a thermometer into the tank as well. This way, you can monitor the temperature and know for sure if the heater is working correctly.

Tips to Remember

A couple of things that you really should remember: You need to purchase the size heater for your aquarium. If you don’t find a heater for your large tank, you can always purchase two and place them in different corners.

The temperature should be set correctly. You don’t want to make it too hot for the fish that you want to add to the tank.

It is easy to install a submersible heater into a fish tank for the first time. Yes, there are a couple of things that you should remember, but overall this is an easy process.

With the right heating setting, and submerging it where it doesn’t touch anything, you will have a correct installed submersible aquarium heater for your fish that needs warmer water.

Aquarium heaters complete guide – all you need to know about fish tank heater

What is the Best HOB Filter for Saltwater Aquarium?

One thing that many beginners with aquariums wonder about, is how to purchase the best HOB filter for saltwater aquariums.

What is the Best HOB Filter for Saltwater Aquarium?

There are different filters that you can purchase, but they aren’t all high quality and recommended. This is why you should know how to find and purchase the right HOB filter.

It will also help when you know some models that are known as the best HOB filter for saltwater aquariums. There is everything that you need to know about finding a high-quality HOB filter for saltwater aquariums.

The Price of HOB Filter

The first thing that you should look for when you are purchasing a HOB filter is the price of the filter. Buying the cheapest one in the market isn’t really recommended.

However, you don’t need to purchase the most expensive one either. You should only make sure that it has all the features that you are looking for and that the filter is in your budget.

By looking at other features as well, you will know if this is something that you can purchase or not.

The Size of Your Aquarium

The other thing that you should consider when you are purchasing your first HOB filter is the size of your tank.

The larger the tank, the larger the filter should be. Or, you should purchase a powerful filter that will be able to filtrate the whole aquarium. Even, if you have a large aquarium.

If you don’t know if the filter is going to be great for your aquarium, and the right strength, then talking to an expert might just help. Doing a bit of research online will also be a great idea to find the right filter for the size of your aquarium.

The Flow Rate of HOB Filter

The other thing that you should know about, is the flow rate of the HOB filter. The more and stronger the flow rate, the better the filter is going to be.

Too many people don’t think that they should consider the flow rate and that this isn’t really something important.

However, this is really important to look at the flow rate. The stronger the flow rate, the better filtration you are going to have.

The Maintenance on the HOB Filter

Maintenance on the HOB Filter

Every type of HOB filter needs maintenance done. The better quality the filter, the less the maintenance will cost you.

This is why this is something that you should look for when you are going to purchase your first HOB filter.

With research, you will see what type of maintenance you are going to need. And, this will ensure that you purchase the one with the cheapest maintenance costs.

The Top 5 HOB Filters

Even, with all these tips on how to purchase a high-quality HOB filter, you might still be struggling to find one that is going to be best for you.

With these top 5 HOB filter brands, you will know for sure that you are going to buy one that is going to be long lasting and high quality:

  • Fluval C Power Filter
  • AquaClear Power Filter
  • Marineland Emperor Pro Series
  • Penn Plax Cascade HOB Aquarium Filter
  • Aqueon Quietflow 50 Filter

When you are starting a saltwater aquarium, you will need to install a HOB aquarium filter.

But, you can’t just purchase any filter. You need to purchase a high-quality filter that is giving you value for money.

With all this mentioned information, you will know for sure that you are going to purchase a HOB filter that will give you a great and healthy saltwater aquarium.

How to Use Aquarium Vacuum Cleaner?

It can be so great to have an aquarium. However, cleaning it can be a hassle.

Especially if you don’t really have the time to clean a large aquarium. Something that you can use, that not many people know about, is the aquarium vacuum cleaner.

How to use aquarium vacuum cleaner?

This is a great, easy and efficient way of cleaning your aquarium without stressing the fish out too much. People are unsure about how to use the vacuum cleaner correctly.

This is why this guide will be so helpful for many aquarium owners.

It is a simple process

The great thing about the aquarium vacuum cleaner is the fact that this is a simple process. You don’t need to worry about doing it wrong.

As long as you know the steps of using the vacuum correctly, and if you know that you should watch out for vacuuming the fish out as well, you will be able to do this fast and effective.

People are afraid to use the vacuum cleaner because they don’t want to damage their fish. But, if you know exactly what the vacuum is, you might be surprised about how easy it can get cleaned with the vacuum.

Things that you need for the vacuum cleaner

You don’t really need to purchase a lot of things in order to start using the vacuum cleaner. There are only a couple of things that you should need.

The first thing is the aquarium vacuum cleaner. You can purchase this at any given pet shop or fish store. It isn’t expensive and can be used in any type of aquarium where you have gravel in.

The second thing that you need to have is an empty bucket. It is preferable if you are making use of a large bucket. The water of the tank is going to flow into the bucket, so how larger, the better.

How to use the vacuum cleaner?

Aquarium Vacuum Cleaner Using

You are putting the vacuum’s back end into the large bucket on the floor. The other point you are pressing against the gravel.

Now, you are using an up and down motion to suck out all the dirt with the water into the bucket. You should be careful of small fish and that you don’t take out too much water at a time.

When the water is clear, you are throwing away the bucket of water and pour new water at the right temperature back into the fish tank again. You need to remember that taking all the water out of the aquarium isn’t recommended. You might make your fish sick.

If you are taking forever to clean your aquarium, then you have wasted your own time. There are many ways that you can clean your aquarium more effectively and faster.

How to use a gravel vac to vacuum your aquarium (Video guide)

One of these methods is if you are using an aquarium vacuum cleaner for cleaning the gravel in the aquarium. You don’t need to take out the fish or struggle for hours to get rid of the dirt between the gravel.