How to Clean a Pond Pump?

Cleaning your pond pump is something that you should consider doing on a regular basis.

Something that many people don’t do, because they don’t know how to clean it correctly. Or, they think that this isn’t just necessary to clean the pond pump.

How to Clean a Pond Pump?

However, there are many things that you should know about pump cleaning. Things that are essential for you to know.

Here is a complete guide about how to clean your pond pump correctly and safely.

Unplug the Pump from the Socket Completely

The first thing that you should do, is to unplug the pump from the socket completely.

We know that this might sound stupid, but there are so many people that are getting electrocuted. Because they think that they can clean the pond pump without removing it from the socket. Even, if you are switching off the power, it still needs to be unplugged for safety.

Not only should you unplug the pump, but you should remove any electrical cables before you start cleaning the pump. You want to make sure that you don’t get any of the electrical cables wet.

Remove the Pump from the Outer Cage and Dissemble Completely

The next step is that you are going to remove the pump from the outer cage and dissemble completely so that you can clean each and every part of the pump.

That said, you should make sure that you keep all the parts together and that you see how you did disassemble it so that you can put it together again.

Many people have ruined their pumps by not putting it together correctly, or by losing some of the most important parts. If the pump is ruined, you will need to purchase another, new pump.

Don’t Use Soap when Cleaning the Pump

This is one of the biggest mistakes that people are making. They are cleaning all the parts of the pump with soap or detergent. This isn’t recommended. This is because you will kill your fish that is living in the pond.

Fish can’t survive with things that are cleaned with soap. No matter how good you are rinsing it after cleaning with soap. There are many small holes in a pond pump, and cleaning it with soap is going to put your fish health at risk. No matter what.

Look for Damage or any Blockage and Clean Thoroughly

Now that the pond pump is open and all the parts have been removed, there is one essential thing to do.

You should inspect the pump and make sure that you are going to clean the pump thoroughly. You should look for any blockages and damage that might harm the fish.

If there are any blockages, you can clean it by rinsing it out. However, if there is any damage to some of the inner parts of the pump, then replacing the pump is recommended.

Broken parts can mean that the pump isn’t going to work sufficiently and risk filthy water that doesn’t have enough oxygen for the fish.

Reassembles and Connect Wires Again

After you have cleaned and rinsed it thoroughly, then you should reassemble the pump correctly. Make sure that you are using all the parts that you took apart.

You should make sure that the pump is completely dry before you are connecting the electrical wires again. This can be dangerous to connect the wires when the pump is still wet.

It is really important to make sure that you are cleaning your pond pump on a regular basis. And, you need to make sure that you are going to clean it correctly. This is something that you should clean and clean correctly or you can kill your fish.

The most important thing that you should know about cleaning your pond pump is that you should not make use of any soap. This is dangerous and can harm your fish. Just clean water is enough to clean all the parts of the pump.

How to Build a Pond Aerator?

Those that have a pond will know about this problem. Problems with getting air into the pond to ensure that the fish stays healthy.

There are people that think that having an aerator in a pond isn’t necessary, and in some cases, they might be right.

However, there are some ponds and type of fish, where the pond aerator is necessary. But, these aerators are expensive.

With these tips and information, you will know how to build your own pond aerator without spending too much money on it.

How to Build a Pond Aerator?

Why is a Pond Aerator Important?

Before you can start building your own pond aerator, it is important to know why the aerator is important for ponds.

People think that in a pond, there is water circulation that is going to ensure that the oxygen levels in the water are fine enough for the fish.

This might be true, but there are a couple of things that you should consider. The deeper the pond, the less chance there will be that you have enough air in the water.

Especially, at the bottom of the pond. There the water will have the least amount of air. Meaning that the fish that is swimming on the surface of the pond will not get enough air.

A pond aerator is making sure that there is air in the water, from the top of the pond to the bottom of the pond.

Things That You Need in Order to Make your Own Aerator

Yes, you can purchase your own aerator, but this can become really expensive.  These pond aerators aren’t cheap. This is one of the most common reasons why people don’t purchase this equipment.

However, the good news is that there are different ways on how you can make your own aerator. It isn’t just cost-efficient, and easy to build.

But, this is going to ensure that you are saving money in purchasing one in store. It doesn’t really matter what design you are going to use, this is the things that you will need to make your own one:

  • Air pump operating on 12 V and lower
  • Soft Oxygen Air Hose
  • Air Stone
  • Weatherproof Pump and electrical housing/enclosure
  • Red and Black Wires
  • Heat Shrink Tubing
  • Two-way terminal block to connect the pumps to power

The Design That You will Need will be Found Online

The things that you will need to make the aerator is the common things that you will need. At the end of the day, it doesn’t really matter how you are making it.

As long as you have everything you need to have in order to create the best possible aerator for your pond.

Most of the designs can be found online. You will be able to find one that is going to be the easiest way to make one.

Putting Everything in a Waterproof Enclosure

One thing that you need to know. It doesn’t matter what type of design you are going to use. You need to make sure that you are putting everything, especially the electrical cords, in a waterproof enclosure.

Even, if you are making use of a waterproof pump, you still need to waterproof all the other things that you are using to make your aerator.

Pond aerator. Something that you need to use, to ensure that you are getting enough air into your pond. There is always a change that your pond won’t have enough oxygen for all your fish.

Oxygen is the one thing that every fish needs to stay healthy and alive. With this article, you will know how to make an aerator yourself for your pond. You will know then for sure that all your fish are going to get air throughout your pond.